During setup, and from within each device information screen, you may notice a representation of signal strength: Strong, Weak and Poor. To ensure a strong connection, the device will not complete setup with a Poor connection, where signal strength is below 65.
A Strong signal is a achieved when the bluebot device has been placed on a straight pipe run, at least 4 1/2″ long, with no fittings or obstructions. bluebot’s sensors must fit the pipe snugly with no gaps.
For locations that meet the above criteria but are still experiencing Weak or Poor signal quality, we recommend carefully applying some of the included coupling compound to your gel pads to help create a better connection between the sensors and pipe.
To re-scan your location at any time to adjust signal quality, simply trigger a re-scan from within the individual device information screen.